How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning and hacking. It works by preventing the engine of your vehicle from starting unless it is started using the PIN code that can be up to 20 characters long.
It is not detected by thieves, who are unlikely to think about this additional layer of security. Some systems also have an application that lets owners disable the immobiliser if they forget their PIN code or to switch to a service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser, a cutting edge security system, can be integrated directly into the ECU of your vehicle. It offers a discrete security barrier against thieves. It is highly efficient and user-friendly. This makes it an excellent addition to your vehicle's arsenal of security. Like all anti-theft devices it's not foolproof and requires regular maintenance in order to function effectively. Fortunately, this guide can help you get the most value from your Ghost 2 Immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with each other over short distances without the need for central control units. It is designed to multiplex electrical wiring in vehicles, which saves on copper. It has many advantages, including low cost and simple use.
In modern vehicles In modern cars, the CAN protocol is used to connect with a variety of systems, including the engine management system (EMS) transmission controller, steering module air conditioning controls, and many more. It also carries sensor data like speed sensors and inputs to control various features of the vehicle. The CAN bus is used to monitor these diverse components, and prevent a vehicle from starting if they're in a dangerous state.
While the CAN bus can be employed for a variety purposes, it's crucial to understand how it operates and how it's secured. It is possible to add additional features to vehicles using CAN bus, however it's crucial to safeguard it against attacks from hackers and other dangers. Installing a firewall, and monitoring your CAN bus with software is the best way to achieve this.
Ghost2's control unit is hidden in the wiring harness or dashboard, which eliminates the possibility of a criminal physically altering it. It is also impossible to reset a PIN or an emergency code without access to the car.
You can enable Transport Mode when you have to give your vehicle away for valet parking, service or for any other reason. This feature will disable both the keyfob and the ignition functions of the Ghost immobiliser. It will only reactivate after the vehicle has travelled 31 mph over a period of 15 minutes.
Making a PIN code
The Ghost immobiliser is a powerful security device that shields your vehicle from theft. The cutting-edge technology uses the PIN code to shut down the engine and stop it from starting without the proper code or an authorized fob or mobile device. The system's discrete design makes it unnoticeable, and provides unparalleled security against theft. Furthermore the system is TASSA verified and can result in significant savings on car insurance premiums.
During installation, Ghost enters a "learning mode" to record the sequence of buttons that are pressed in order to create unique pin codes. The installer will guide you through activating the system after the pin code is created. Once activated it will Ghost system will shut down the motor that starts your vehicle until a valid PIN has been entered or the vehicle is switched to transport mode. This makes it extremely difficult for thieves to duplicate or hack your vehicle's starter system.
Installing a Ghost immobiliser is straightforward but it is crucial to follow the specific instructions in the user's manual to ensure that it operates properly. Multimeters and basic hand tools can be used to verify electrical values. Insulation tape, heat shrink tubing, and cable ties can be utilized to shield wires from damage. Be certain to test the system regularly to identify any potential issues and errors.
Once the installation is complete, it is important to conduct a final test of the system before turning on the ignition in your vehicle. The Ghost immobiliser will re-arm itself after a period of 3 to 30 seconds, based on your vehicle's model. The system also comes with a Service/Valet mode that allows you to temporarily disable the system while servicing your vehicle or parking valet.
The immobiliser should be hidden in an inconspicuous location under the dashboard or steering wheel. It is recommended to use a small amount of paint or duct tape to mark the CAN H and L wires so that you can easily locate the wires during testing. The CAN H and L wires must also be connected to an electrical source that can provide an uninterrupted 12V. It is crucial to verify the connections again after testing because an the incorrect identification of these wires may cause system malfunction.
The system must be activated
A ghost immobiliser stops your car from starting until you press a few buttons inside the vehicle, typically on the steering wheel, the door panel or the central console. The sequence can be altered by the user at any time. Once activated, the system will not be turned off. This is a fantastic option for anyone who wants to secure their vehicle from theft.
The system is designed to be undetectable. This means it cannot be detected by modern diagnostics or code-grabbing technology. It does not emit radio frequencies either making it even more difficult for thieves detect.
If the device is located, it will stop the engine from starting. It will also sound an alarm to scare thieves away. The device can be used to track the location of the car, which can help police recover it when it is stolen.
If you're interested in a ghost-immobiliser, contact the experts at Car Specalist Customs to get a quote and discuss your options. We are fully qualified to install a ghost immobilise r to your vehicle and will make sure it is concealed in a hard-to-reach area. We can also provide other security measures like an ignition lock for your wheel and a kill switch to keep your car safe from thieves.
Disarming the system
It is important to know how to disable the Ghost immobiliser if fitted to your car. It can be used in the event you forget your keys or your battery fails. The system has a unique PIN code, which only you are aware of. It will not start the vehicle without this code. The easiest way to enter the code is to press a series of buttons on your dashboard or steering wheel. This is much simpler than using a key fob, and keeps others from copying the remote.
Unlike some aftermarket immobilisers that require cutting wires for installation, Ghost2 is non-invasive and is compatible with your vehicle's bus network to operate. Its main feature is its ability to bypass the engine without affecting your vehicle's normal functions, making it hard for thieves to use signal boosters to clone your car key. It does not emit radio frequency, therefore thieves are unable to detect it.
The Ghost system has the option of a Transport Mode which allows you to temporarily disable security for certain situations such as service or transportation. This is a great option when you need to lend your vehicle to someone else without sharing the PIN code or when you wish to keep your vehicle secure while driving it. To activate the Transport Mode, press the service button five times within a period of 2 seconds. The Ghost system will confirm activation with five indication signals.
When you're done, remember to save the emergency code in a safe place away from your vehicle. If you ever find yourself locked out of your car, you can call the technician or the company that installed the system and they will give you the code. If you're unable to get in touch with them, you can contact an authorized dealer. However, this may require verification procedures and you may be charged for additional fees.
Aside from the convenience of this system, you can also rely on it to protect your vehicle from theft and help reduce the cost of insurance. Insurance companies often offer reduced monthly premiums, or even financial incentives for installing this anti-theft system.